Designed to seal bolted, flanged or screwed pipe joints to prevent leakage in most engineering situations and plumbing systems delivering hot and cold potable water and low-pressure steam. Silicone-based, does not support microbiological growth. Non-toxic, environmentally friendly. A WRAS approved material – meets the requirements of the Water Regulations Advisory Scheme (WRAS) Tests of effect on Water Quality, BS 6920:2014: Parts 1 – 3/ Hot (up to 85 Centigrade) and Cold Water Use. All joints must be completely clean, dry and free from any cleansing agents or loose material prior to application.
Heldite H2Ok Jointing Compound for Potable Water (250ml) Part No: HDH2OK250
- Heldite H2OK is a silicone-based jointing compound that does not support microbiological growth
- Suitable For plumbing systems delivering hot and cold potable (drinking) water and low pressure steam.
- Non-toxic and environmentally friendly that meets the requirements of the Water Regulations Advisory Scheme (WRAS)
- Prevents leakages
Where to use Heldite H2Ok?
- Taps
- Plumbing pipes
- Compatible with most metals, plastics and rubber
Delivered: 1 - 2 working days (Ireland, Mainland EU)
€9.53 €7.75 exc VAT
8 in stock
Specification
- Part Number
- HDH2OK250
- Brand
- Heldite
- gtin
- 5060174250095
- MPN
- HDH2OK250
- Type
- Semi-permanent pipe and thread sealant.
- Application
- Apply with a putty knife
- Coats
- For screwed joints apply one coat around cleaned mating thread, remove excess material and screw up immediately.
- Drying Time
- Not applicable
- Re-coating Time
- As required immediately.
- Application Temp.
- Ideally 15 – 25°C
- Coverage
- Approximately 16 squares metres per litre
- Maintenance
- Not applicable
- Compatibility
- Compatible with most metals, plastics and rubber.
- Settlement
- Stir well before use.
- Shelf-life/Storage
- Many years if stored in a cool, dry area in original sealed container.
- Clean-Up
- Clean equipment and brushes with white spirit.
- Sizes
- 250ml